silicone conveyor belt Patent High-speed ziplock bag manufacturing machine

silicone conveyor belt Patent High-speed ziplock bag manufacturing machine.

[sw_latest_products products=”9″ cats=”432″]

The utility model discloses a high-speed ziplock bag making machine, which includes a frame, a feeding device, a transport device, a thermal cutting device, a cold apparatus, devices and discharge means belt sent. Feeding means, said conveyor means, said conveyor belt drive means and the discharging means are disposed transversely on the frame along the film feed direction bags. High-speed ziplock maker, characterized in that said heat cutting device at the front side of the belt transmission device and includes a thermal cutting blade and a silicone roller, heat cutter blades down and right side to the roll surface When the bag film silicon through the upper roll surface silicone roller, heat cutter blades will affect the roll surface; silicone rollers, and thermal cutting knife is connected to a tool holder, and by the power-driven longitudinal movement Cots cut and seal the pouch film. According to high-speed ziplock maker with silicone conveyor belt, optimized structure design thermal cutting device solves the silicone belts often replace the entire machine by a stepping motor or servo motor control, and through the computer display problems LCD screen, and run stable and efficient.

silicone conveyor belt

Claim (4) translated from Chinese
1. High-speed ziplock bag making machine comprising a frame, a discharge device, feeding device, fervent means cold means, conveyor means and feeding means, discharging device, feeding device, and a discharge conveyor means finger bags on the back and forth along film transport direction of the frame order, wherein: the fervent equipment side of the conveyor means before the eagerly device includes fervent and silicone roller cutter, cutting blade down and eagerly silica rolls surface on the right, eager to move up and down the tool attached to the cutter frame powered by the bag film on the cutting blade from acting on the desire of the bag film surface face silicone roll silicone roll is cut and sealed when.
2. High-speed Ziplock bag making machine, according to claim 1, characterized in that: the feed is provided between the device and the tension arm discharge device feeding device.
3. Speed ​​ziplock bag machine, according to claim 1, characterized in that: a front side of the feeding means is provided with an optical tracking device.
Speed ​​according to claim 1 ziplock machine, characterized in that: making machine adopts computer control means control motor stepper motor or servo motor control.
Description translated from Chinese
Board-speed Ziplock bag making machine

TECHNICAL FIELD

[0001] The utility model relates to a bag-making apparatus, and more particularly relates to a high-speed ziplock machine.

background

[0002] High-speed Ziplock bag making machine for the manufacture of various sizes of zipper bag equipment. Art high-speed ziplock bag machines, equipment supply device includes a discharge, fervent means cold means, conveyor means and the feeding device, the bag film is first released through a discharge device, and then transported by the feeding device is eager means cutting and sealing, then cooled shaping apparatus by the conveyor belt to the cooling device, the last collected by the feeding means single ziplock send dressing table. In the bag making process, the cutter is eagerly means a direct role in the conveyor belt silicone bag film is cut off, so easy to damage the tool belt of silica, silicone band needs to be changed to waste time and money and material frequently resources.

Reveal

[0003] of the deficiencies of the prior art, the utility model to solve the problem is to provide a solution to the frequent replacement of silica with high speed ziplock bag machine problems.

[0004] For this purpose, the utility model is achieved by: a high-speed zipper bag making machine, comprising a frame, a discharge device, feeding device, fervent means cold means and discharge conveyor plant equipment, discharge devices, supply means , conveyor means and outlet means before the film is set sequentially in the conveying direction of the bag on the frame, characterized in that: the front side of the belt conveyor means located ardent desire device includes hot knife and silicone roll , the roll surface of the cutting blade with a silicone roller rush down the right, eager to move up and down the tool attached to the cutter frame power supply, when the bag film from the silicone roll surface, the cutting blade eager to act on silica gel roll on roll off the seal bag film look.

[0005] In addition, in the utility model in the front side of the conveyor in order to optimize the device structure design eager eagerly means the cutter when cutting the bag film is the desire, the tool will not act directly on silicon band, but in the silicon roller The first action will be transferred away from the silicone membrane with the bag, and then send the set-up process of cold pressing by the cold means, and finally by a single fastener at the finishing stage we were collected in the feed means feed. Because the silicone conveyor belt heat resistant until protection, so there is no need for regular replacement silicone band silicone conveyor belt, so as to solve the problem of frequent replacement silicone tape.

[0006] Advantageously, the feed tension arm means provided between the device and the discharge device. The above design makes the tension during transport membrane ziplock bags reasonable control, to ensure making machine to work properly.

silicone conveyor belt, silicon belt, silicone belt, silicone band conveyor,

[0007] Advantageously, the front side feed device has an optical tracking device. With the above construction, when the feed delivery device, the length of the bag color film optical tracking device identification between to control the length of the ziplock bag is transported, in order to ensure the bag cut to the same length, in order to ensure the quality of the bag.

[0008] Preferably, bag making machine adopts computer control means controlling the motor is a stepper motor or servo motor control. Through the above design, the machine uses a stepper motor or servo motor control, the effect of computer liquid crystal displays, stable smell.

BRIEF DESCRIPTION [0009] FIG. Figure 1 is a schematic block diagram of a utility model.

Detailed description

Utility Model [0010] Referring to the drawings, a high speed ziplock bag machine, comprising a frame, the discharge means 2, the tension arm 13, the press apparatus 3, an optical tracking device 4, the supply device 5, eagerly means cooling apparatus 67, the conveyor means 8, a feed device 9, sorting table 11 and computer control means 10, discharging means 2, the tension arm means 13, perforating unit 3, an optical tracking device 4, the supply means 5, conveyor unit 8, 9 and 11 stations around the feeding device along the collating sequence on the bag film conveying direction 100 frame arrangement, fervently means 6 on the front side of the conveyor unit 8, eager device 6 includes fervent silicone roller roll surface cutter 62 and 63, and to look down the cutting blade 62 with a silicone rubber roller 63 is in a heat cutter 62 is composed of a main motor 14 is connected to the cutting tool holder 61 is driven up and down movement, when through from silica On the role of the cutting blade rolls fervently 6263 rolls off the bag film 100 and the seal of the bag film 100 roll surface 63 facing the silicone roll; computer control means 10 is provided near the finishing table position 11, the main motor 14 and the discharge motor 12 is stepper motor or servo motor control.

3 perforated punch device discharge device pumped out of the supply reel 2 I will work bag film 100, the bag film 100 by the tension arm 13 after: [0011] The utility model is to work through the following ways after leaving the optical tracking device 4-color tracking by the feeding device 5 will be provided in the length of bag film 100 eager device 6, bag film 100 is subjected to silica gel eagerly cutting device 6 with the conveyor belt 8 after a fixed length transmission means, the transmission process is executed in the cold by cold forming apparatus and equipment 7,9 101 final discharge into the collection by a single fastener finishing table 11. Entire bag including tension arm means by the discharge bag film process apparatus, and then the feeding apparatus of the optical tracking device, then fervent means cold material from the cutting means to the finishing table, all controlled by computer control devices.

silicone roller, silicone rubber roller, ziplock bag making machine, zipper bag equipment, zipper bag belt, zip lock belt, silicone zip lock belt, zip lock band.