Clamp-Style Pipe Connectors – DN Size Options

Description

Clamp-Style Pipe Connectors – DN Size Options

Clamp-style pipe connectors are offered with DN labels and explicit inner-diameter and length values. Examples include DN25 with 34 mm inner diameter and 100 mm length, DN32 with 40 mm inner diameter and 100 mm length, and DN40 with 50 mm inner diameter and 100 mm length. Compare those dimensions directly with the pipe interfaces.

Options and identification

Available option labels include DN25/ inner diameter 34MM length 100MM, DN32/ inner diameter 40MM length 100MM, DN40/ inner diameter 50MM length 100MM, DN50/ inner diameter 60MM length 100MM. Confirm the selected option, supplied quantity, and dimensions before ordering. Where a size is presented as a code, confirm its measurement order and units with the selected configuration.

Match both pipe interfaces

Measure each pipe end and the available connection length. Confirm the connector profile, required clamp arrangement, and whether the chosen option includes clamps. For reducers, identify the larger and smaller ends separately. Provide the conveyed medium and operating conditions so the connector configuration can be checked before ordering.

Frequently asked questions

Does a nominal size define the complete connector? No. Confirm the measured interface dimensions and the connector length or height as well.

Are all pictured clamps included? Confirm the hardware supplied with the selected option and the order quantity before purchasing.

Request a quotation

Contact IKSONIC with a photo or sketch of the pipe joint, the dimensions at both ends, and the quantity required. Include the available installation space and any access restrictions around the clamps.

When replacing an existing component, include photographs showing both the part and its installation position. Keep all measured values together with their units, and identify any dimensions that still need checking. This helps keep the requested option clear when confirming the order.