Pump Floating Valve Seals – P200.027 / P200.009C References

Description

Pump Floating Valve Seals – P200.027 / P200.009C References

Floating-valve seals and gaskets for low-temperature pumping equipment are identified with P200.027 and P200.009C references. White, brown, and sky-blue options are recorded. Clarify whether the order concerns the valve seal or gasket and include the pump model so the component can be matched to its installation position.

Options and identification

Available option labels include white, brown, sky blue. Confirm the selected option, supplied quantity, and dimensions before ordering.

Check the complete seal geometry

Compare the complete seal profile, not just its outer diameter. Provide the shaft or housing dimensions, the seal width, and a clear photograph of the contact surfaces. Identify the equipment and the part number when available. The mounting arrangement, medium, and operating conditions should be considered together when choosing a replacement.

Frequently asked questions

Is a matching diameter enough? No. The section profile, width, mounting arrangement, and mating surfaces also matter when identifying a replacement seal.

What if the old seal has no legible number? Send photographs, measured dimensions, and the equipment model. Mark which measurements were taken from the seal and which came from the shaft or housing.

Request a quotation

Contact IKSONIC with the medium, temperature, pressure requirements, and movement of the assembly. If the component has a spring or separate support ring, identify those parts in the photographs and confirm whether they must be supplied together.

When replacing an existing component, include photographs showing both the part and its installation position. Keep all measured values together with their units, and identify any dimensions that still need checking. This helps keep the requested option clear when confirming the order.