Japan-Imported P-Series FKM O-Rings

Description

Japan-Imported P-Series FKM O-Rings

Japan-imported P-series FKM O-rings include P3 and P4 options identified as 2.8 × 1.9 mm and 3.8 × 1.9 mm, respectively, with ten-piece pack descriptions. Select the P-series code, inner diameter, cross-section, and pack quantity together. Confirm the exact configuration before ordering additional sizes.

Options and identification

Available option labels include P3 FKM inner diameter 2.8*1.9mm (10 pieces ), P4 FKM inner diameter 3.8*1.9mm (10 pieces ), P5/4.8*1.9mm (10 pieces ), P6/5.8*1.9mm (10 pieces ). Confirm the selected option, supplied quantity, and dimensions before ordering. Where a size is presented as a code, confirm its measurement order and units with the selected configuration.

Select the material and cross-section

Identify the inner diameter and cross-section required for the seal groove. Keep those dimensions separate from the outer diameter. Choose the material for the medium and operating conditions rather than relying on color. For a replacement, compare the nominal requirement with the removed ring, which may no longer reflect its original dimensions.

Frequently asked questions

Can I order using only an outside diameter? Provide the inner diameter and cross-section where possible, together with the groove or equipment details.

Does the material name define every operating limit? No. Confirm the grade and application conditions for the selected size and material.

Request a quotation

Send the required dimensions, material, quantity, and any equipment or drawing reference. Include the medium and temperature requirements, and clarify the pack quantity before finalizing the order.

Send your component reference, required quantity and application details through our product inquiry page. Include the delivery destination and any selection details that still need confirmation so the requested supply is clearly defined.