PTFE Thin Hex Nuts: M-Series Fine Threads and G Threads
Thin PTFE hex nuts with 23 source-listed M-series and G-series thread designations. Confirm thickness, fit and working conditions for the selected model.
- Description
- Contact Us
Description
PTFE Thin Hex Nuts for Connection-Specific Selection
IKSONIC supplies thin PTFE hex nuts in listed M-series fine-thread and G-series configurations. The low-profile hexagonal form is shown in the product photographs. As a China-based supplier, IKSONIC welcomes wholesale enquiries and factory sourcing requests based on the exact thread designation and assembly requirements.
The source identifies these nuts as PTFE. The word thin describes the product style, not a verified thickness dimension. Confirm nut thickness, across-flats dimension, thread engagement and fit before choosing a part for your assembly.
Specifications / Models
The table contains the 23 explicitly listed thread designations. The M-series numbers after the multiplication sign are retained as source designations; the listing does not explicitly provide their units. G-series labels are kept separately and are not converted into a measured bore diameter. No general thread standard, tolerance or nut-height value is inferred.
| Thread family | Model designation |
|---|---|
| M-series fine thread | M8 × 1.0 |
| M-series fine thread | M10 × 1.0 |
| M-series fine thread | M12 × 1.0 |
| M-series fine thread | M12 × 1.25 |
| M-series fine thread | M14 × 1.0 |
| M-series fine thread | M14 × 1.5 |
| M-series fine thread | M16 × 1.0 |
| M-series fine thread | M16 × 1.5 |
| M-series fine thread | M18 × 1.0 |
| M-series fine thread | M18 × 1.5 |
| M-series fine thread | M20 × 1.5 |
| M-series fine thread | M22 × 1.5 |
| M-series fine thread | M24 × 1.5 |
| M-series fine thread | M27 × 1.5 |
| M-series fine thread | M30 × 1.5 |
| G-series thread | G1/8 |
| G-series thread | G1/4 |
| G-series thread | G3/8 |
| G-series thread | G1/2 |
| G-series thread | G3/4 |
| G-series thread | G1 |
| G-series thread | G1-1/2 |
| G-series thread | G2 |
A separate custom option appears in the source. For sizes not shown, send the required specification for review; this is not confirmation that every custom size is available.
What to Confirm Before Ordering
- Exact M or G designation and the mating male thread.
- Required nut thickness, across-flats dimension and dimensional units.
- Assembly loads, tightening method and required thread engagement.
- Media, operating temperature and quantity.
The source describes high/low-temperature and corrosion resistance, but verified model-specific limits are not provided here. No temperature range, load rating, torque value or certification is assigned to these nuts on this page. Confirm compatibility with the actual working conditions rather than assuming equivalence with a metal nut.
Frequently Asked Questions
Are M-series and G-series nuts interchangeable?
No interchangeability is implied. Send the complete mating-thread designation and select the matching configuration.
Does thin mean a standard nut height?
Not in this listing. The available source does not establish a height for each model, so the required thickness must be confirmed separately.
How do I enquire about wholesale supply?
Send the model, dimensions, quantity and operating conditions through the IKSONIC enquiry page. This is an enquiry-only product listing, without a public selling price.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
