PTFE Hex Socket Screws: M3–M16 Model Selection

Description

PTFE Hex Socket Screws

IKSONIC supplies PTFE screws with a hexagonal socket drive and cylindrical head. The listed selection contains 148 model designations across M3, M4, M5, M6, M8, M10, M12, M14 and M16 series. Specify the complete designation when requesting a quotation.

IKSONIC is a China-based supplier for industrial polymer fastener enquiries. We support wholesale sourcing for equipment manufacturers, factory purchasing teams and maintenance buyers. Review the required fastener dimensions and application conditions before ordering.

Specifications and Models

Material: polytetrafluoroethylene (PTFE). Drive: internal hex socket. The following table preserves the listed model codes. The source option text does not explicitly state the unit of the number after the multiplication sign; confirm the dimensional interpretation, thread pitch and required length before ordering.

Series	Listed model designation
M3	M3 × 6
M3	M3 × 8
M3	M3 × 10
M3	M3 × 12
M3	M3 × 15
M3	M3 × 16
M3	M3 × 20
M3	M3 × 25
M3	M3 × 30
M3	M3 × 35
M3	M3 × 40
M4	M4 × 6
M4	M4 × 8
M4	M4 × 10
M4	M4 × 12
M4	M4 × 15
M4	M4 × 16
M4	M4 × 20
M4	M4 × 25
M4	M4 × 30
M4	M4 × 35
M4	M4 × 40
M4	M4 × 45
M4	M4 × 50
M5	M5 × 6
M5	M5 × 8
M5	M5 × 10
M5	M5 × 12
M5	M5 × 15
M5	M5 × 16
M5	M5 × 20
M5	M5 × 25
M5	M5 × 30
M5	M5 × 35
M5	M5 × 40
M5	M5 × 45
M5	M5 × 50
M6	M6 × 6
M6	M6 × 8
M6	M6 × 10
M6	M6 × 12
M6	M6 × 15
M6	M6 × 16
M6	M6 × 20
M6	M6 × 25
M6	M6 × 30
M6	M6 × 35
M6	M6 × 40
M6	M6 × 45
M6	M6 × 50
M6	M6 × 55
M6	M6 × 60
M8	M8 × 8
M8	M8 × 10
M8	M8 × 12
M8	M8 × 15
M8	M8 × 16
M8	M8 × 20
M8	M8 × 25
M8	M8 × 30
M8	M8 × 35
M8	M8 × 40
M8	M8 × 45
M8	M8 × 50
M8	M8 × 55
M8	M8 × 60
M8	M8 × 65
M8	M8 × 70
M8	M8 × 75
M8	M8 × 80
M8	M8 × 85
M8	M8 × 90
M8	M8 × 100
M10	M10 × 10
M10	M10 × 12
M10	M10 × 15
M10	M10 × 16
M10	M10 × 20
M10	M10 × 25
M10	M10 × 30
M10	M10 × 35
M10	M10 × 40
M10	M10 × 45
M10	M10 × 50
M10	M10 × 55
M10	M10 × 60
M10	M10 × 65
M10	M10 × 70
M10	M10 × 75
M10	M10 × 80
M10	M10 × 85
M10	M10 × 90
M10	M10 × 95
M10	M10 × 100
M12	M12 × 10
M12	M12 × 12
M12	M12 × 15
M12	M12 × 20
M12	M12 × 25
M12	M12 × 30
M12	M12 × 35
M12	M12 × 40
M12	M12 × 45
M12	M12 × 50
M12	M12 × 55
M12	M12 × 60
M12	M12 × 65
M12	M12 × 70
M12	M12 × 75
M12	M12 × 80
M12	M12 × 85
M12	M12 × 90
M12	M12 × 95
M12	M12 × 100
M12	M12 × 105
M12	M12 × 110
M12	M12 × 120
M12	M12 × 130
M12	M12 × 140
M12	M12 × 150
M14	M14 × 15
M14	M14 × 20
M14	M14 × 25
M14	M14 × 30
M14	M14 × 35
M14	M14 × 40
M14	M14 × 45
M14	M14 × 50
M14	M14 × 55
M14	M14 × 60
M14	M14 × 65
M14	M14 × 70
M14	M14 × 75
M14	M14 × 80
M16	M16 × 15
M16	M16 × 20
M16	M16 × 25
M16	M16 × 30
M16	M16 × 35
M16	M16 × 40
M16	M16 × 45
M16	M16 × 50
M16	M16 × 55
M16	M16 × 60
M16	M16 × 65
M16	M16 × 70
M16	M16 × 75
M16	M16 × 80

Confirming the Fastener Specification

Provide the complete model designation and quantity, together with the mating thread specification. Confirm thread pitch, screw length, head diameter, head height and socket dimensions where these are important to the assembly. The photographs show general form and do not serve as dimensional drawings.

The source dimensional chart contains an inconsistent M10 socket-size entry and does not clearly identify its dimensional units. Its numeric head and socket tolerances are therefore not presented as confirmed product specifications here. Request the required dimensions for review rather than applying an uncertain chart value to an order.

Material and Service Conditions

These are PTFE polymer fasteners, not steel screws with a PTFE coating. Tell us about the contact medium, service temperature and mechanical requirements so the application can be reviewed. Do not assume a metal fastener’s torque, load capacity or installation method applies to a polymer fastener.

No tensile load rating, tightening torque, electrical rating or operating-temperature limit is assigned to every listed model on this page. If your application requires a particular material grade, tolerance or test document, identify it before ordering. General material descriptions are not substitutes for the requirements of the actual assembly.

Frequently Asked Questions

Which series are listed?

The selection spans M3 through M16 in the nine series shown in the table. Only the individual combinations listed are included; this is not a statement that all possible lengths or thread configurations are available.

Are nuts or washers included?

This selection concerns the socket screws listed in the table. Do not assume that nuts, washers or installation tools are included. Specify any additional components separately in your enquiry.

Can I use the source chart to choose a hex key?

Confirm the socket dimensions for the exact model. The available chart has an inconsistent entry, so its values should not be treated as verified tool-selection dimensions.

What information helps with a quotation?

Provide the model code, quantity, mating thread details and essential dimensions. Include the intended service conditions and any documentation or inspection requirements so these can be reviewed before an order is placed.

Wholesale Enquiries

Contact IKSONIC with the complete PTFE socket screw designation and quantity. For a non-listed size, state the required dimensions for review; an enquiry does not confirm availability or a production commitment.

Email: [email protected]

WhatsApp/Mobile/WeChat: +86-13370616532  , +86-15315489052

WeChat: taishanfu

Skype ID: wingxsonic