SES RE Motor Shaft-Face Seals, Small Model Range
SES RE motor shaft-face seals with 23 listed model options, including RE 48-65-4.5, supplied through IKSONIC in China for wholesale and factory sourcing enquiries. Confirm the exact model and specification before ordering. The source entry RE 45-624.5 requires clarification; photographs are product-family references only.
- Description
- Contact Us
Description
SES RE Motor Shaft-Face Seals: Small Model Range
Source SES RE motor shaft-face seals through IKSONIC for replacement, wholesale purchasing and factory sourcing enquiries. This listing contains 23 model options, including RE 48-65-4.5. Use the complete listed code to identify your requirement, then confirm the exact specification against your equipment before ordering.
SES is a third-party brand. IKSONIC is the China supplier contact for this listing, not the manufacturer of SES-branded products.
Listed Model Options
| Option | Listed model code |
|---|---|
| 1 | RE 10-24-3.5 |
| 2 | RE 11-26-3.5 |
| 3 | RE 12-26-3.5 |
| 4 | RE 14-30-4 |
| 5 | RE 15-30-4.0 |
| 6 | RE 16-32-4 |
| 7 | RE 17-32-4 |
| 8 | RE 18-33-4 |
| 9 | RE 20-35-4 |
| 10 | RE 22-40-4 |
| 11 | RE 24-40-4 |
| 12 | RE 25-40-4 |
| 13 | RE 26-40-4 |
| 14 | RE 28-43-4 |
| 15 | RE 30-47-4.5 |
| 16 | RE31 31.52-44.45-3.8 |
| 17 | RE 35-52-4.5 |
| 18 | RE 38-55-4.5 |
| 19 | RE 40-57-4.5 |
| 20 | RE 41-57-4.5 |
| 21 | RE 42-59-4.5 |
| 22 | RE 45-624.5 |
| 23 | RE 48-65-4.5 |
The model codes are reproduced as listed, including their spacing, separators and decimal notation. These codes are not a verified dimension table. Confirm the units and the meaning of each number for the selected model.
Model entry requiring confirmation: RE 45-624.5 appears in this form in the source listing. Its formatting is ambiguous and has not been corrected. Confirm the complete code and dimensional specification before selecting or ordering this option.
Confirm Your Seal Requirement
- Provide the full model code and required quantity.
- Compare the existing seal marking with the listed option and your equipment specification.
- Provide measured dimensions and any relevant equipment or dimensional reference.
- Confirm the sealing material, metal specification and application requirements for the exact model.
Do not assume that a similar-looking code or photograph establishes interchangeability. If the original marking is incomplete or differs from the table, describe the discrepancy in your enquiry.
Photograph Reference
The front-and-reverse, assorted-seal and stacked-seal photographs are shared product-family examples. They are not a model-by-model guide to these 23 options. Markings visible on a photographed example may refer to a model outside this list and do not guarantee the identification or specification of the seal you require.
China Supplier, Wholesale and Factory Sourcing
Contact IKSONIC in China with your SES RE seal requirements for wholesale purchasing or factory sourcing. Include the exact model, quantity, existing seal identification and application details so your enquiry is based on the required specification rather than appearance alone. For an unlisted requirement, provide the original marking and relevant dimensions instead of choosing the nearest code.
Frequently Asked Questions
How do I choose a model from this range?
Start with the complete existing seal marking and the equipment specification. Match these to a listed code, then confirm the dimensions, units and required material specification before ordering.
What does RE 45-624.5 mean?
This is the exact source entry. The separation of its numbers is unclear, so it needs confirmation. Do not treat it as a verified dimensional specification or assume a corrected code.
Do the photographs show every listed model?
No. They show reference examples from the product family. A visible marking on one example does not confirm that it represents your selected option or even a model within this list.
Is a common material specification confirmed for all options?
No product-wide material specification is established here. Confirm the sealing material and metal specification for the exact model and intended application.
What should I send with a sourcing enquiry?
Send the full listed code, quantity, existing seal identification, measured dimensions and relevant equipment requirements. Flag any unclear marking or discrepancy, particularly the RE 45-624.5 entry.
Contact IKSONIC to confirm your SES RE seal requirement.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
