3099083 Oil Pan Gasket

Oil pan gasket for reference 3099083. Compare the stepped end and the perimeter bolt pattern with the oil pan before ordering.

SKU: IKS-B017-05 Category:
somdn_product_page

Description

The gasket follows the joint between the oil pan and the engine. The stepped end distinguishes the two ends of the profile. Compare that end first, then check the hole positions along both long sides.

Specifications

Part reference 3099083
Profile Long rectangular perimeter with a stepped end and a series of fastener holes
Material Steel (listed for this reference)

Selection and enquiries

What should I measure on the pan?

Measure the overall length and width, then the spacing between bolt centres near the stepped end. Include the engine serial number and a photograph taken square to the flange.

How do I request a quotation?

Send IKSONIC the part reference 3099083, the required quantity and your delivery destination. Include a drawing if the replacement must meet specific dimensions or tolerances.

If you have any questions or products request, please leave message or call us.

Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532  , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat iksonic.com rubber plastic steel factory

Scan the QR code above, add me on WeChat.

Add us on WhatsApp

Add me on WhatsApp Contact by Scanning QR.

    Questions ?

    If you need any products, please let us know. We will answer you within 1 hour to 12 hours.

    Your Name (required)

    Your Email (required)

    Your Phone (required)

    Your Country

    Your Message