High pressure hollow core stainless steel o-ring seal SS316 corrosion resistant

Description

Specification for High pressure hollow core stainless steel o-ring seal

Material: High quality various model of stainless steel
Cross-sectional shape O type
effect Fixed seal
Scope of application Water pipes, automobiles, pumps, chemical pipelines, cylinders, bearings, valves, doors and windows, electrical appliances, rollers, vacuum aviation strong power
nature Corrosion resistance, high pressure resistance, high temperature resistance, wear resistance
Brand: IKSONIC.COM
model: O-ring made from Alloy metal / steel.
thickness 1.6（mm）
inside diameter: 40（mm）
Outer diameter: 43.2（mm）
Whether standard parts Non-standard parts
Operating temperature -270 ～ 1000 （℃）
Working pressure ≤150（MPa）

Various types for Alloy metal Stainless Steel O ring Seal

1. Metal hollow O-ring (common type)

Suitable for 10-10Pa ultra-vacuum 6.88Mpa (70kgf / cm2) low and medium pressure seals. It can be used directly on grooved flanges. When using flat flanges, it should be used together with the retaining ring.
2. Metal hollow O-ring (balance type)

Suitable for sealing with pressure higher than 6.86Mpa (70kgf / cm2). It can be used directly on grooved flanges. When using flat flanges, it should be used together with the retaining ring.
3. Hollow metal O-ring seal (pressure type)

The sealing ring is based on the basic type, and the inside of the tube is filled with a certain amount of inert gas. At high temperature, the gas expansion increases the elasticity of the tube body, thereby ensuring that the sealing ring is

Sealing effect at high temperature. The sealing ring is suitable for use in high temperature environment with working temperature above 400 ℃.

4. Metal C-type sealing ring (inside and outside)

The inner opening type is suitable for positive pressure working conditions, and the outer opening type is suitable for vacuum working conditions. C-ring is a typical self-sealing, that is, the greater the system pressure, the better the sealing effect. Because of opening and self

Sealing principle, so you don’t need to use a large preload to get a very good sealing effect, but you need to use INCONEL 718/750 alloy.
5. Metal C-type sealing ring (upper opening type)

The upper opening type is suitable for radial sealing of metal sealing rings. The product has a simple structure, long life, high temperature resistance, high pressure resistance, low pressure load or zero ballast. It is a rare choice for some special equipment.
6. Metal C-type sealing ring (spring-enhanced)

Suitable for pressure vessel steam generator, gasoline, diesel engine fire ring, exhaust joint and other flanges with rough surface finish, non-planar mating surface is the best choice, internal spring provides

High pressure capacity up to 38,000 psi to increase the sealing force, the leakage rate is the lowest.
7. Metal E-type sealing ring

Suitable for high temperature pneumatic joints, turbine engine exhaust valve joints, turbine engine housings, extremely low load flanges and or joints with considerable movement Multi-convolution elastic ring can be used for very high

Degree application. The internal pressure can be energized or pressure neutral to reverse the pressure. Temperature resistance up to 870 degrees Celsius.
8. Metal U-shaped sealing ring

The metal U-ring is a low-load seal, and its scope of application: high-temperature joints have obvious movement. It can withstand up to 870 degrees Celsius. Good support heel and side ensure the highest pressure capacity

Metal U-rings generally use electroless plating.

9. Metal solid O-ring

Uses: low-cost, high-load internal pressure surface sealing. The continuous sealing surface is allowed to be used in three sides, chamfered joints and non-rectangular cross-section grooves. With a rigid mating surface with minimum relative motion, suitable Standard metal o-ring groove.

The high-pressure hollow core stainless steel O-ring seal SS316 made by China manufacturer IKSONIC is a high-quality, high-precision, and high-performance sealing ring. It is made of high quality stainless steel material, with excellent corrosion resistance and sealing property, able to withstand the corrosion of various chemicals. Its hollow core design allows it to have better sealing performance and longer service life under high-pressure environments. The elastic material of the O-ring can tightly bind with various surface materials, providing excellent sealing performance. IKSONIC’s steel sealing ring is widely used in sealing applications in high-pressure reactors, valves, pipes, and other equipment in the chemical, pharmaceutical, food, oil, gas, and other industries. If you need high-quality sealing solutions, the high-pressure hollow core stainless steel O-ring seal SS316 corrosion-resistant sealing ring will be your best choice.