HDPE Pipeline Casing Spacers
Segmented HDPE casing spacers for supporting a carrier pipe inside an outer casing during pipeline crossings. Seventeen listed diameter designations are available for confirmation; designation units, assembled fit and supply scope must be verified before ordering.
- Description
- Contact Us
Description
HDPE Pipeline Casing Spacers
IKSONIC HDPE pipeline casing spacers support a carrier pipe inside an outer casing during pipeline crossings. The segmented design provides separation between the carrier pipe and casing. The stated material is high-density polyethylene (HDPE).
Listed Diameter Designations and Segment Combinations
The following numbers are the listed diameter designations. Their measurement unit is not specified, so they must not be treated as confirmed dimensions in millimetres or inches. Confirm the unit, actual carrier-pipe outside diameter and casing inside diameter before selecting a configuration.
| Listed diameter designation (unit to be confirmed) | Listed segment combination |
|---|---|
| 32 | 5 small segments |
| 48 | 6 small segments |
| 60 | 7 small segments |
| 76 | 8 small segments |
| 89 | 10 small segments |
| 108 | 12 small segments |
| 114 | 14 small segments |
| 159 | 5 half segments |
| 219 | 3 medium segments + 1 half segment |
| 273 | 4 medium segments |
| 325 | 4 medium segments + 1 half segment |
| 406 | 6 medium segments |
| 455 | 6 medium segments + 1 half segment |
| 508 | 5 large segments |
| 610 | 6 large segments |
| 711 | 7 large segments |
| 813 | 8 large segments |
Segment Reference Dimensions
The dimension labels identify the following length × width × thickness values in centimetres. These are individual segment reference dimensions, not the assembled ring diameter or confirmed radial clearance.
| Segment type | Length × width × thickness |
|---|---|
| Large segment | 30 × 17.5 × 5 cm |
| Medium segment | 19 × 12.5 × 3.5 cm |
| Half segment | 10 × 12.5 × 3.5 cm |
| Small segment | Dimensions to be confirmed |
Confirm the Installation Requirements
- Provide the actual carrier-pipe outside diameter, casing inside diameter and any pipe coating or joint dimensions affecting clearance.
- Confirm the required assembled spacer geometry, fastening arrangement and installation clearance rather than selecting by the designation alone.
- Specify the supported pipe weight, installation conditions and proposed spacer spacing. Suitability and spacing require confirmation for the intended application.
- State any electrical insulation requirements. No quantified dielectric rating or compliance certification is specified here.
IKSONIC Manufacturing Enquiries
Contact IKSONIC, an industrial rubber and plastic products manufacturer, with the listed designation and installation dimensions to confirm the required HDPE casing-spacer configuration, quantity and supply scope. Images show component references; confirm the components included with your selected configuration.
Shipping
Shipping transit is estimated at 3–7 days after dispatch. This does not include production or order-preparation time; confirm the dispatch schedule and destination-specific transit estimate before ordering.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
