PTFE Hose Barb Fittings | Male and Female Threaded
PTFE hose barb fittings supplied by IKSONIC in 265 listed models: 208 male-thread and 57 female-thread options. Compare DN, fractional, metric and UNF model labels with each listed barb dimension. Confirm thread compatibility and male φ dimensions before ordering. Wholesale and custom fitting inquiries welcome.
- Description
- Contact Us
Description
PTFE Hose Barb Fittings with Male and Female Threads
IKSONIC supplies PTFE hose barb fittings for connecting a hose end to a threaded connection. This range includes 265 listed models: 208 male-thread models and 57 female-thread models. The material is polytetrafluoroethylene (PTFE). Select the thread designation and the corresponding barb label together rather than choosing by a nominal size alone.
The male range includes DN6 through DN65 source model labels, metric-designated M5, M6, M8, M10 and M12 options, and two explicitly listed UNF options. The female range includes 1/8, 1/4, 3/8, 1/2, 3/4 and 1-inch source designations, with G prefixes retained only where listed.
Model Selection and Size Notes
- DN and fractional designations below are source model labels. DN is not a measured outer diameter.
- The male options use a φ suffix without specifying its unit or measurement location. The table retains that suffix as listed; confirm the dimension and unit before ordering.
- The female options explicitly identify the hose barb outer diameter in millimeters. This is the barb OD, not a stated hose inner diameter.
- Thread compatibility must be confirmed for the selected model. No BSP or NPT designation is added to options that do not state it, and an omitted G prefix is not inferred.
- The DN32 male options retain the source wording of 1.2-inch as a model label. It has not been converted to a different fractional designation.
- Eight female models carry both G 1" and 6 fen in the source. Those inconsistent labels are retained together below and require confirmation before selection.
Male-Thread PTFE Hose Barb Fittings: 208 Listed Models
Each row is one listed male-thread model. The φ values are reproduced without an assumed measurement unit.
| Thread / model label | Source φ suffix (unit unspecified) |
|---|---|
| DN6 (1/8) | φ3 |
| DN6 (1/8) | φ4 |
| DN6 (1/8) | φ5 |
| DN6 (1/8) | φ6 |
| DN6 (1/8) | φ7 |
| DN6 (1/8) | φ8 |
| DN6 (1/8) | φ9 |
| DN6 (1/8) | φ10 |
| DN6 (1/8) | φ11 |
| DN6 (1/8) | φ12 |
| DN6 (1/8) | φ13 |
| DN6 (1/8) | φ14 |
| DN6 (1/8) | φ15 |
| DN6 (1/8) | φ16 |
| DN8 (1/4) | φ3 |
| DN8 (1/4) | φ4 |
| DN8 (1/4) | φ5 |
| DN8 (1/4) | φ6 |
| DN8 (1/4) | φ7 |
| DN8 (1/4) | φ8 |
| DN8 (1/4) | φ9 |
| DN8 (1/4) | φ10 |
| DN8 (1/4) | φ11 |
| DN8 (1/4) | φ12 |
| DN8 (1/4) | φ13 |
| DN8 (1/4) | φ14 |
| DN8 (1/4) | φ15 |
| DN8 (1/4) | φ16 |
| DN8 (1/4) | φ17 |
| DN8 (1/4) | φ18 |
| DN8 (1/4) | φ20 |
| DN10 (3/8) | φ3 |
| DN10 (3/8) | φ4 |
| DN10 (3/8) | φ5 |
| DN10 (3/8) | φ6 |
| DN10 (3/8) | φ7 |
| DN10 (3/8) | φ8 |
| DN10 (3/8) | φ9 |
| DN10 (3/8) | φ10 |
| DN10 (3/8) | φ11 |
| DN10 (3/8) | φ12 |
| DN10 (3/8) | φ13 |
| DN10 (3/8) | φ14 |
| DN10 (3/8) | φ15 |
| DN10 (3/8) | φ16 |
| DN10 (3/8) | φ17 |
| DN10 (3/8) | φ18 |
| DN10 (3/8) | φ19 |
| DN10 (3/8) | φ20 |
| DN15 (1/2) | φ3 |
| DN15 (1/2) | φ4 |
| DN15 (1/2) | φ5 |
| DN15 (1/2) | φ6 |
| DN15 (1/2) | φ7 |
| DN15 (1/2) | φ8 |
| DN15 (1/2) | φ9 |
| DN15 (1/2) | φ10 |
| DN15 (1/2) | φ11 |
| DN15 (1/2) | φ12 |
| DN15 (1/2) | φ13 |
| DN15 (1/2) | φ14 |
| DN15 (1/2) | φ15 |
| DN15 (1/2) | φ16 |
| DN15 (1/2) | φ18 |
| DN15 (1/2) | φ19 |
| DN15 (1/2) | φ20 |
| DN15 (1/2) | φ22 |
| DN15 (1/2) | φ25 |
| DN20 (3/4) | φ3 |
| DN20 (3/4) | φ4 |
| DN20 (3/4) | φ5 |
| DN20 (3/4) | φ6 |
| DN20 (3/4) | φ7 |
| DN20 (3/4) | φ8 |
| DN20 (3/4) | φ9 |
| DN20 (3/4) | φ10 |
| DN20 (3/4) | φ11 |
| DN20 (3/4) | φ12 |
| DN20 (3/4) | φ13 |
| DN20 (3/4) | φ14 |
| DN20 (3/4) | φ15 |
| DN20 (3/4) | φ16 |
| DN20 (3/4) | φ17 |
| DN20 (3/4) | φ18 |
| DN20 (3/4) | φ19 |
| DN20 (3/4) | φ20 |
| DN20 (3/4) | φ22 |
| DN20 (3/4) | φ25 |
| DN25 (1-inch source label) | φ8 |
| DN25 (1-inch source label) | φ3 |
| DN25 (1-inch source label) | φ4 |
| DN25 (1-inch source label) | φ5 |
| DN25 (1-inch source label) | φ6 |
| DN25 (1-inch source label) | φ7 |
| DN25 (1-inch source label) | φ9 |
| DN25 (1-inch source label) | φ10 |
| DN25 (1-inch source label) | φ11 |
| DN25 (1-inch source label) | φ12 |
| DN25 (1-inch source label) | φ13 |
| DN25 (1-inch source label) | φ14 |
| DN25 (1-inch source label) | φ15 |
| DN25 (1-inch source label) | φ16 |
| DN25 (1-inch source label) | φ17 |
| DN25 (1-inch source label) | φ18 |
| DN25 (1-inch source label) | φ19 |
| DN25 (1-inch source label) | φ20 |
| DN25 (1-inch source label) | φ22 |
| DN25 (1-inch source label) | φ25 |
| DN25 (1-inch source label) | φ32 |
| DN32 (1.2-inch source label) | φ25 |
| DN32 (1.2-inch source label) | φ32 |
| DN32 (1.2-inch source label) | φ38 |
| DN32 (1.2-inch source label) | φ40 |
| DN40 (1.5-inch source label) | φ25 |
| DN40 (1.5-inch source label) | φ32 |
| DN40 (1.5-inch source label) | φ40 |
| DN50 (2-inch source label) | φ40 |
| DN50 (2-inch source label) | φ50 |
| DN65 (2.5-inch source label) | φ50 |
| 1/4-28UNF | φ2.5 |
| 3/8-24UNF | φ2.5 |
| M5 | φ2.5 |
| M5 | φ3 |
| M5 | φ4 |
| M5 | φ5 |
| M5 | φ6 |
| M5 | φ7 |
| M5 | φ8 |
| M5 | φ9 |
| M5 | φ10 |
| M5 | φ11 |
| M5 | φ12 |
| M6 | φ3 |
| M6 | φ4 |
| M6 | φ5 |
| M6 | φ6 |
| M6 | φ7 |
| M6 | φ8 |
| M6 | φ10 |
| M6 | φ11 |
| M6 | φ12 |
| M6 | φ13 |
| M6 | φ14 |
| M6 | φ15 |
| M6 | φ16 |
| M8*1 | φ3 |
| M8*1 | φ4 |
| M8*1 | φ5 |
| M8*1 | φ6 |
| M8*1 | φ7 |
| M8*1 | φ8 |
| M8*1 | φ9 |
| M8*1 | φ10 |
| M8*1 | φ11 |
| M8*1 | φ12 |
| M8*1 | φ13 |
| M8*1 | φ14 |
| M8*1 | φ15 |
| M8*1 | φ16 |
| M8*1.25 | φ3 |
| M8*1.25 | φ4 |
| M8*1.25 | φ5 |
| M8*1.25 | φ6 |
| M8*1.25 | φ7 |
| M8*1.25 | φ8 |
| M8*1.25 | φ9 |
| M8*1.25 | φ10 |
| M8*1.25 | φ11 |
| M8*1.25 | φ12 |
| M8*1.25 | φ13 |
| M8*1.25 | φ14 |
| M8*1.25 | φ15 |
| M8*1.25 | φ16 |
| M10*1.5 | φ3 |
| M10*1.5 | φ4 |
| M10*1.5 | φ5 |
| M10*1.5 | φ6 |
| M10*1.5 | φ7 |
| M10*1.5 | φ8 |
| M10*1.5 | φ9 |
| M10*1.5 | φ10 |
| M10*1.5 | φ11 |
| M10*1.5 | φ12 |
| M10*1.5 | φ13 |
| M10*1.5 | φ14 |
| M10*1.5 | φ15 |
| M10*1.5 | φ16 |
| M10*1.5 | φ17 |
| M10*1.5 | φ18 |
| M10*1.5 | φ19 |
| M10*1.5 | φ20 |
| M12*1.5 | φ3 |
| M12*1.5 | φ4 |
| M12*1.5 | φ5 |
| M12*1.5 | φ6 |
| M12*1.5 | φ7 |
| M12*1.5 | φ8 |
| M12*1.5 | φ10 |
| M12*1.5 | φ11 |
| M12*1.5 | φ12 |
| M12*1.5 | φ13 |
| M12*1.5 | φ14 |
| M12*1.5 | φ15 |
| M12*1.5 | φ16 |
| M12*1.5 | φ17 |
| M12*1.5 | φ18 |
| M12*1.5 | φ19 |
| M12*1.5 | φ20 |
Female-Thread PTFE Hose Barb Fittings: 57 Listed Models
Each row is one listed female-thread model. Barb outer diameters are stated in millimeters in the source. The 1/4 models without a G prefix remain separate from the explicitly labeled G1/4 model.
| Thread / model label | Listed barb outer diameter |
|---|---|
| G1/8 | 3 mm OD |
| G1/8 | 4 mm OD |
| G1/8 | 5 mm OD |
| G1/8 | 6 mm OD |
| G1/8 | 7 mm OD |
| G1/8 | 8 mm OD |
| G1/8 | 9 mm OD |
| G1/8 | 10 mm OD |
| G1/8 | 12 mm OD |
| 1/4 | 3 mm OD |
| 1/4 | 4 mm OD |
| 1/4 | 5 mm OD |
| 1/4 | 6 mm OD |
| G1/4 | 7 mm OD |
| 1/4 | 8 mm OD |
| 1/4 | 9 mm OD |
| 1/4 | 10 mm OD |
| 1/4 | 12 mm OD |
| 1/4 | 14 mm OD |
| G3/8 | 3 mm OD |
| G3/8 | 4 mm OD |
| G3/8 | 5 mm OD |
| G3/8 | 6 mm OD |
| G3/8 | 7 mm OD |
| G3/8 | 8 mm OD |
| G3/8 | 9 mm OD |
| G3/8 | 10 mm OD |
| G3/8 | 12 mm OD |
| G3/8 | 14 mm OD |
| G1/2 | 3 mm OD |
| G1/2 | 4 mm OD |
| G1/2 | 5 mm OD |
| G1/2 | 6 mm OD |
| G1/2 | 7 mm OD |
| G1/2 | 8 mm OD |
| G1/2 | 9 mm OD |
| G1/2 | 10 mm OD |
| G1/2 | 12 mm OD |
| G1/2 | 14 mm OD |
| G1/2 | 16 mm OD |
| G1/2 | 18 mm OD |
| G1/2 | 20 mm OD |
| G3/4 | 6 mm OD |
| G3/4 | 8 mm OD |
| G3/4 | 10 mm OD |
| G3/4 | 11 mm OD |
| G3/4 | 12 mm OD |
| G3/4 | 16 mm OD |
| G3/4 | 20 mm OD |
| G 1" (also labeled 6 fen) | 6 mm OD |
| G 1" (also labeled 6 fen) | 8 mm OD |
| G 1" (also labeled 6 fen) | 10 mm OD |
| G 1" (also labeled 6 fen) | 11 mm OD |
| G 1" (also labeled 6 fen) | 12 mm OD |
| G 1" (also labeled 6 fen) | 16 mm OD |
| G 1" (also labeled 6 fen) | 18 mm OD |
| G 1" (also labeled 6 fen) | 20 mm OD |
Wholesale and Custom PTFE Fitting Inquiries
Contact IKSONIC, a PTFE fitting supplier in China, for manufacturer sourcing, wholesale quantities or custom connection requirements. The source listing offers customization and bulk-order inquiries; availability and the final specification need to be confirmed for the selected model.
For a quotation, provide the complete model label, male or female thread, required barb dimension, quantity and mating connection details. Include the operating medium, temperature and pressure so suitability can be reviewed. This listing does not establish pressure ratings, temperature limits, tolerances or certifications.
Contact IKSONIC about PTFE hose barb fittings to confirm a model or discuss a custom requirement.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
