T10 PU Steel-Wire Timing Belt

Description

T10 PU Steel-Wire Timing Belt

The T10 PU steel-wire timing belt combines a polyurethane belt body with an internal steel-wire core for timing-belt drive applications. The source describes a one-piece cast construction without a splice, with polyurethane on the inner and outer surfaces. IKSONIC is a China-based supplier for wholesale timing-belt sourcing. Choose the complete T10 model code and required width, then confirm the remaining dimensions against the machine and pulley specification.

Product Specifications

• Product family: T10 timing belt.
• Belt body: Polyurethane (PU), with PU inner and outer surfaces as described in the source structure image.
• Reinforcement: Internal steel-wire core.
• Construction: Source-described one-piece cast belt without a splice.
• Tooth height: 2.5 mm, explicitly stated in the product parameter panel. This is tooth height, not total belt thickness.
• Listed widths: 15 mm and 20 mm, supplied as separate width choices.
• Model options: 55 distinct T10 codes, listed individually below.
• Width enquiries: The parameter panel describes cutting to the requested width. Confirm any required width and applicable cutting terms before ordering.

Specifications / Models

55 Listed T10 Model Codes

Each row below is one model code exactly as listed. The numeric suffix is retained as part of that code: the source does not explicitly define it as a measured length or supply a unit for it. No belt lengths or tooth counts have been calculated from these numbers. The separate contact-for-other-requirements entry is an enquiry placeholder and is not counted as a model.

Complete list of 55 T10 belt model codes

No.	Listed model code
1	T10-300
2	T10-330
3	T10-370
4	T10-390
5	T10-400
6	T10-410
7	T10-440
8	T10-450
9	T10-460
10	T10-480
11	T10-500
12	T10-510
13	T10-530
14	T10-540
15	T10-560
16	T10-600
17	T10-610
18	T10-620
19	T10-630
20	T10-650
21	T10-660
22	T10-680
23	T10-690
24	T10-700
25	T10-720
26	T10-730
27	T10-750
28	T10-780
29	T10-800
30	T10-810
31	T10-840
32	T10-850
33	T10-860
34	T10-880
35	T10-890
36	T10-900
37	T10-910
38	T10-920
39	T10-950
40	T10-960
41	T10-970
42	T10-980
43	T10-1000
44	T10-1010
45	T10-1050
46	T10-1080
47	T10-1100
48	T10-1110
49	T10-1140
50	T10-1150
51	T10-1200
52	T10-1210
53	T10-1240
54	T10-1250
55	T10-1260

Width Choices

Width is a separate selection from model code. The two width labels below do not create additional independent model codes or prove that every model-and-width combination is supplied. State the exact code and width together so the combination can be confirmed.

Two width options explicitly listed in millimetres

Listed width	How to specify
15 mm	Separate width selection; confirm with the chosen T10 model code.
20 mm	Separate width selection; confirm with the chosen T10 model code.

Selecting a Replacement Timing Belt

1. Read the full marking on the existing belt and compare it with the exact T10 model code. Do not identify a replacement by appearance or suffix alone.
2. Confirm the required belt width. The listed choices are 15 mm and 20 mm; any other width needs a separate specification enquiry.
3. Check the required belt length and its measurement basis, tooth count, tooth pitch and tooth profile against the machine or pulley documentation. These values are not established merely by the model-code list.
4. Verify whether the source-stated 2.5 mm tooth height and steel-wire-reinforced, one-piece cast construction meet your application requirements.
5. Provide quantity, machine application and operating conditions, and confirm final dimensions before approving cut-to-width work.

The source selection illustrations discuss general belt-identification methods, but they do not supply a verified load, speed, power or service-temperature rating for each listed model and width. This page therefore does not assign such ratings or claim compatibility with a particular machine.

Frequently Asked Questions

How many models are listed?

There are 55 distinct T10 model codes. The 15 mm and 20 mm width choices are separate attributes, and the contact placeholder is not a model. Specify a code and width together when enquiring.

Does T10-300 mean a confirmed 300 mm belt length?

The supplied model list does not explicitly define the suffix or its unit. T10-300 is therefore retained as a model code rather than converted into a length specification. Confirm the required length and measurement basis for the chosen code before ordering.

What are the belt body and reinforcement materials?

The product information identifies polyurethane with a steel-wire core. The structure image describes PU on both the inner and outer surfaces and a one-piece cast construction without a splice.

Is 2.5 mm the total belt thickness?

No. The parameter panel labels 2.5 mm as tooth height. It does not identify that value as total thickness; confirm any total-thickness requirement separately.

Can I request a different width?

The source describes cutting to a requested width, while the explicit width options here are 15 mm and 20 mm. Ask IKSONIC to confirm any other width for your selected model and review the applicable cutting and return/exchange terms before work proceeds.

Can color or a generic selection chart establish the correct belt?

No. Use the complete model code, required width, confirmed belt dimensions and machine requirements. Appearance and generic charts do not establish a specific model’s fit, material finish or operating rating.

Wholesale Enquiries with IKSONIC

Contact IKSONIC for T10 PU steel-wire timing belt sourcing in China. Include the full model code, required width, quantity and any belt markings or machine specifications needed to confirm the replacement.

Email: [email protected]

WhatsApp/Mobile/WeChat: +86-13370616532  , +86-15315489052

WeChat: taishanfu

Skype ID: wingxsonic