Yellow Aramid Braided Rope — 10 to 24 mm Options
Yellow braided aramid rope in eight nominal diameters from 10 to 24 mm, plus a separate 10 mm mixed-braid option.
- Nine listed choices, each ordered by the metre
- Confirm fiber composition, continuous lengths and cut-end requirements
- Three distinct product views show the bundle, braid and cut end
- Plain rope material; no assigned working-load or life-safety rating
- Description
- Contact Us
Description
Yellow Aramid Braided Rope — 10 to 24 mm Options
IKSONIC yellow aramid braided rope is offered in eight nominal diameters from 10 to 24 mm, with a separate 10 mm mixed-braid choice. The round braided form is supplied by the metre for industrial material enquiries that require a specified rope size and construction. The folded-bundle and cut-end photographs show the rope surface and fiber arrangement rather than an assembled lifting or safety system.
Choose the diameter and construction together. Two entries have a 10 mm nominal diameter, but one is explicitly a mixed-braid option; these should not be treated as interchangeable material specifications. Confirm the exact fiber composition and braid construction for the selected option when discussing the application.
Diameter and Construction Choices
| Selection | Nominal diameter | Listed construction distinction | Color | Ordering unit |
|---|---|---|---|---|
| 1 | 16 mm | Standard listed rope option | Yellow | Metre |
| 2 | 10 mm | Standard listed rope option | Yellow | Metre |
| 3 | 18 mm | Standard listed rope option | Yellow | Metre |
| 4 | 14 mm | Standard listed rope option | Yellow | Metre |
| 5 | 12 mm | Standard listed rope option | Yellow | Metre |
| 6 | 10 mm | Mixed braid; composition to be agreed | Yellow | Metre |
| 7 | 15 mm | Standard listed rope option | Yellow | Metre |
| 8 | 20 mm | Standard listed rope option | Yellow | Metre |
| 9 | 24 mm | Standard listed rope option | Yellow | Metre |
“Standard listed rope option” distinguishes the ordinary diameter entry from the separate mixed-braid entry; it is not a certification or a named construction standard. The metre is the ordering unit, not a promise that every order is supplied as individual one-metre pieces. Specify total quantity, required continuous lengths and any cut-length tolerance in the enquiry.
Product Specification Summary
| Item | Specification or selection requirement |
|---|---|
| Product form | Round braided rope |
| Material family | Aramid; a separate mixed-braid option is available |
| Color | Yellow |
| Nominal diameter range | 10, 12, 14, 15, 16, 18, 20 and 24 mm |
| Option count | Nine, including both ordinary and mixed-braid 10 mm entries |
| Length unit | Metre; agree continuous or cut lengths before supply |
| End condition | Agree cut-end treatment or any required finished termination separately |
| Application rating | No working-load limit, breaking force or life-safety approval is assigned by this listing |
Specify the Rope for the Equipment
For a replacement, identify the nominal diameter as well as the space available around the rope path. Provide the guide, groove or contact-surface dimensions where they matter to fit. A rope compressed by a measuring tool or bent around a small radius may not present the same cross-section as an unloaded straight sample, so agree the measurement method and dimensional tolerance rather than relying only on a photograph.
Describe the actual operating conditions: movement or stationary contact, repeated bending, surface roughness, exposure to liquids or cleaning agents, and normal and peak temperatures with exposure duration. These details allow the selected construction to be reviewed for the intended equipment. A general material description is not a substitute for a documented operating limit for the finished rope.
Length, Cut Ends and Assembly Details
The photographs include folded rope and a close view of an exposed cut end. Folding is a presentation method, not evidence that the rope is an endless loop or a pre-formed sling. The visible red tape is an end-identification or handling detail in the photograph; it is not a rated termination. State whether the enquiry is for plain rope lengths or requires a separately specified finishing operation.
Include the required length per piece, number of pieces, acceptable joins if any, and how the rope will be attached or retained. Any termination, splice, connector or completed assembly needs its own design and suitability review. Such components are not included merely because rope is supplied by the metre.
Frequently Asked Questions
Are all nine choices the same material construction?
No. The 10 mm mixed-braid choice is listed separately. Confirm its fiber blend and construction before substituting it for the ordinary 10 mm entry or another diameter. This page does not apply a blanket 100% fiber-content claim to every option.
Does a larger diameter establish a safe load?
No. Diameter alone does not establish breaking force, a working-load limit or a safe assembly capacity. This listing is not a recommendation for lifting, vehicle recovery, climbing, fall protection or rescue. Use a purpose-rated system and the applicable engineering review for safety-critical work.
What information helps with an accurate enquiry?
Send the chosen diameter and construction, total quantity in metres, continuous or cut-length requirements, relevant equipment dimensions and operating conditions. IKSONIC can use those details to discuss the appropriate supply specification without assuming an unverified performance rating.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
