Grey Fiberglass Cloth Clamp-Style Flexible Exhaust Duct
Grey fiberglass cloth clamp-style flexible exhaust duct, available for specification-based enquiries through IKSONIC, a China supplier serving wholesale buyers. Source size descriptions state 50–1500 mm and 51–1500 mm; confirm the minimum size, dimension definition and operating requirements before ordering.
- Description
- Contact Us
Description
Grey Fiberglass Cloth Clamp-Style Flexible Exhaust Duct
IKSONIC is a China supplier serving wholesale enquiries for grey fiberglass cloth flexible exhaust duct. The source describes a clamp-style composite, extendable duct for exhaust applications. Use the source information below to define your enquiry, then confirm the supplied construction, dimensions and service conditions before ordering.
The source markets the duct with general flame-retardant, high-temperature-resistant and aging-resistant descriptions. These descriptions do not establish a tested fire classification, certified smoke-extraction use or a verified operating limit. No numerical temperature or pressure rating is specified here.
Source Size Descriptions and Product Details
The available source gives two different minimum sizes. Both are retained below rather than selecting one or creating a list of unverified models. The source does not clearly define whether these size figures are nominal diameter, inner diameter, outer diameter or another measurement.
| Item | Source description | Selection note |
|---|---|---|
| Product attribute size range | 50–1500 mm | Confirm the minimum available size and the dimension being measured. |
| Gallery size description | Minimum 51 mm to maximum 1500 mm; source says intermediate sizes can be produced. | The stated minimum differs from the product attribute. Confirm the exact requested size and availability; this is not a verified model list. |
| Material description | Fiberglass cloth | Confirm the full material and layer specification for the intended service. |
| Colour | Grey | Confirm the supplied appearance if matching an existing installation. |
| Construction description | Clamp-style composite, flexible and extendable duct | Confirm connection details and required installed length. |
| Customization | Source describes customization support. | Submit the required dimensions and application for feasibility review. |
There are no individually verified size models in the supplied product attributes. A range does not confirm stock, tolerances or the availability of every intermediate size. Ask IKSONIC to confirm the selected specification in writing.
Selection Checklist
- Size: state the required nominal, inner and outer dimensions as applicable, the mating connection dimensions and any tolerances.
- Length: identify the required installed length and any compression or extension requirements. A supplied length or extension ratio has not been verified.
- Service conditions: describe the exhaust medium, continuous and peak temperatures, exposure duration, pressure or vacuum conditions and surrounding environment.
- Installation: provide connection type, routing constraints and any bend or support requirements for review.
- Documentation: identify any project-specific fire-performance, material or compliance evidence required before selection.
- Supply: provide the quantity, packaging needs and destination so wholesale supply details can be confirmed.
Application suitability depends on the confirmed product specification. Do not use the general source descriptions as a design rating for a safety-critical exhaust or smoke-control system.
Frequently Asked Questions
Is the minimum size 50 mm or 51 mm?
The product attribute states 50–1500 mm, while the gallery states a minimum of 51 mm and a maximum of 1500 mm. The discrepancy is unresolved. Confirm the minimum available size and the exact required measurement before selecting the duct.
Are the size figures confirmed inner diameters?
No clear diameter definition has been verified in the source. State your required inner diameter, outer diameter or nominal connection size explicitly and request confirmation of the matching supplied dimensions.
Can I request a size within the listed range?
The gallery says intermediate sizes can be produced, and a source panel describes customization support. Send the exact size, length and quantity for review. Availability and the final configuration still need confirmation; no individual models or production commitments are established here.
What temperature and pressure can this duct withstand?
No verified numerical operating temperature, pressure or vacuum rating is provided in this listing. Share the full service conditions and request a confirmed specification before use.
Does the flame-retardant description establish fire certification?
No. The supplied source uses general flame-retardant wording but does not establish a test standard, classification or certification. Request the evidence required for your project, particularly for any fire-rated or smoke-control application.
How do I request a wholesale quotation?
Send IKSONIC the required size and dimension definition, length, quantity, connection details, operating conditions and documentation requirements. Confirm the final specification and supply terms before ordering.
Contact IKSONIC for a grey fiberglass cloth flexible exhaust duct quotation and specification review.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
