Clamp-Style Straight Pipe Connectors – Six Size Options

Description

Clamp-Style Straight Pipe Connectors – Six Size Options

This selection of black clamp-style straight pipe connectors offers six dimensional combinations. The product image shows four connectors with metal hose clamps; the photograph illustrates the range rather than establishing the quantity supplied in an order. Match the selected connector to the pipe dimensions and the space available at the joint.

Choose the connection size

The six selection codes are OD40/ID32/H90, OD50/ID40/H90, OD70/ID60/H90, OD73/ID63/H90, OD86/ID76/H90, and OD100/ID90/H90. OD identifies the recorded outer-diameter value, ID the inner-diameter value, and H the height value. Confirm units and fit before ordering.

Installation details to confirm

Measure both pipe interfaces and check the available axial space. Confirm the connector material, the required clamp arrangement, and whether clamps are included with the selected option. Share the conveyed medium, operating temperature, and pressure requirements so the offered configuration can be checked against your application. A dimensional match alone does not establish suitability for every fluid or operating condition.

Frequently asked questions

Can I order by nominal pipe size alone? Include the measured interface dimensions as well. Nominal size does not replace a check of the connector and pipe geometry.

Does the photograph show the exact order quantity? Confirm the quantity and included hardware for your selected option before ordering.

Request the right connector

Send the required size combination, quantity, and a photo or sketch of the existing joint. For a reducer, identify both ends clearly and include the available connection height. IKSONIC can use these details to clarify the configuration you need.

For clamp-style pipe connectors, contact IKSONIC with your required size and quantity.