M2 and M3 Silicone Vibration Mounts for FPV Flight Controllers
Silicone vibration mounts for model-aircraft flight-controller installations. M2 and M3 options are offered in black, blue and red, with 10-piece and 100-piece pack selections. Check the mounting geometry before ordering.
- Description
- Contact Us
Description
M2 and M3 Silicone Vibration Mounts
IKSONIC supplies silicone vibration mounts for model-aircraft flight-controller installations. These small, grooved mounts are listed for FPV flight-controller stacks, including F4 and F7 applications. They are mounting components rather than complete flight controllers. Select the mount by its actual dimensions and the board installation, not by the controller name alone.
As a China supplier, IKSONIC supports wholesale inquiries for the M2 and M3 options below. Black, blue and red selections are listed in both 10-piece and 100-piece packs. The photographs show the mount profile, central opening and representative installation; electronic boards shown are application references and are not included.
Specifications and Models
The dimensions below are in millimetres and follow the source dimension images. M2 and M3 are the listed selection names; the silicone mounts are not described as internally threaded nuts.
| Selection | Colour | Outer diameter (mm) | Bore (mm) | Overall height (mm) | Pack selection |
|---|---|---|---|---|---|
| M2 | Black | 4 | 2 | 6.6 | 10 pieces |
| M2 | Black | 4 | 2 | 6.6 | 100 pieces |
| M2 | Blue | 4 | 2 | 6.6 | 10 pieces |
| M2 | Blue | 4 | 2 | 6.6 | 100 pieces |
| M2 | Red | 4 | 2 | 6.6 | 10 pieces |
| M2 | Red | 4 | 2 | 6.6 | 100 pieces |
| M3 | Black | 6 | 3 | 6.6 | 10 pieces |
| M3 | Black | 6 | 3 | 6.6 | 100 pieces |
| M3 | Blue | 6 | 3 | 6.6 | 10 pieces |
| M3 | Blue | 6 | 3 | 6.6 | 100 pieces |
| M3 | Red | 6 | 3 | 6.6 | 10 pieces |
| M3 | Red | 6 | 3 | 6.6 | 100 pieces |
Choosing a Mount
- Compare the board opening and fastening arrangement with the 2 mm or 3 mm bore selection.
- Check the available installation height against the listed 6.6 mm overall height.
- Confirm that the grooved profile suits the board thickness and surrounding clearance. A groove-width tolerance is not specified here.
- State the required colour and pack quantity when requesting a quotation.
No numerical vibration-reduction rating, hardness, load capacity or dimensional tolerance is stated for these options. Confirm the requirements of your particular assembly before placing an order.
Frequently Asked Questions
Are the M2 and M3 mounts the same size?
No. The source dimensions show a 4 mm outer diameter and 2 mm bore for M2, and a 6 mm outer diameter and 3 mm bore for M3. Both are shown with a 6.6 mm overall height.
Does F4 or F7 compatibility guarantee a fit?
No. These are application terms from the listing, not a universal fit guarantee. Check your mounting holes, board thickness and fastening arrangement.
What information should a wholesale inquiry include?
Please provide the M2 or M3 selection, colour, pack quantity, total quantity and relevant mounting dimensions.
Browse related damping components or contact IKSONIC with your requirements.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
