Transparent Food-Grade Silicone Tubing for Water and Appliances
IKSONIC manufactures transparent food-grade silicone tubing for water and appliance applications. Choose cut-length or whole-coil options and confirm size, contact conditions and required material documentation.
- Description
- Contact Us
Description
Food-Grade Silicone Tubing for Water and Appliance Applications
IKSONIC manufactures transparent food-grade silicone tubing in China and supports wholesale inquiries. Our food-grade silicone hose is available for water dispensers, coffee-machine fluid routing and protective uses in household appliances. Confirm the required dimensions and contact conditions for the selected application before ordering.
Materials and Features
- Material: food-grade silicone rubber.
- Appearance: transparent tubing.
- Temperature range: −60 to +200°C. Operating limits depend on exposure duration and service conditions; confirm suitability for the selected formulation and service.
- General features: softness, arc and corona resistance, low-odor characteristics and pressure resistance. No numerical pressure rating or electrical test value is established by this product.
- Applications: water dispensers, coffee-machine fluid routing, and household-appliance wiring protection.
Food-grade identification does not establish a particular certification. Request applicable material and food-contact documentation for your fluid, temperature, contact duration and destination requirements. This page does not claim FDA or other third-party certification without supporting evidence.
Specifications and Ordering Lengths
The table below groups this product’s actual ordering options by inside and outside diameter. ID/OD values are in millimetres except the explicitly flagged unit confirmation note. Cut-length options and whole-coil lengths are in metres. They describe length options, not minimum order quantities, inventory guarantees or confirmed uninterrupted supply lengths.
| Inside diameter / ID (mm) | Outside diameter / OD (mm) | Cut-length options (m) | Whole-coil length option (m) |
|---|---|---|---|
| 2 | 4 | 5, 20 | 833 |
| 2 | 5 | 5 | 476 |
| 2 | 6 | 5 | 313 |
| 3 | 5 | 5, 20 | 625 |
| 3 | 6 | 5, 20 | 370 |
| 3 | 8 | 1 | 182 |
| 4 | 5 | 5, 20 | 1111 |
| 4 | 6 | 5, 20 | 500 |
| 4 | 8 | 1, 5 | 208 |
| 4 | 10 | 1 | 119 |
| 5 | 6 | 5, 20 | 909 |
| 5 | 7 | 5, 20 | 417 |
| 5 | 8 | 5, 20 | 256 |
| 5 | 10 | 1, 5 | 133 |
| 6 | 7 | 5, 20 | 769 |
| 6 | 8 | 5, 20 | 357 |
| 6 | 9 | 1, 5 | 222 |
| 6 | 10 | 1, 5 | 156 |
| 6 | 12 | 1 | 93 |
| 7 | 9 | 1, 5 | 313 |
| 7 | 10 | 1, 5 | 196 |
| 7 | 11 | 1 | 139 |
| 7 | 12 | 1 | 139 |
| 7 | 13 | 1 | Confirm |
| 8 | 11 | 1 | Confirm |
| 8 | 10 | 5 | Confirm |
| 8 | 12 | 1, 5 | 125 |
| 8 | 14 | 1 | Confirm |
| 9 | 12 | 1, 5 | Confirm |
| 9 | 13 | 1 | Confirm |
| 9 | 14 | 1 | 87 |
| 10 | 12 | 1 | Confirm |
| 10 | 13 | 1, 5 | Confirm |
| 10 | 14 | 1, 5 | Confirm |
| 10 | 16 | 1 | 64 |
| 10 | 18 | 1 | 45 |
| 12 | 14 | 1 | 192 |
| 12 | 16 | 1 | Confirm |
| 12 | 18 | 1 | Confirm |
| 13 | 18 | 1 | Confirm |
| 14 | 16 | 1, 5 | Confirm |
| 14 | 18 | 1 | Confirm |
| 15 | 20 | 1 | 57 |
| 16 | 20 | 1 | Confirm |
| 16 | 21 | 1 | Confirm |
| 17 | 22 | 1 | Confirm |
| 18 | 22 | 1 | 63 |
| 19* | 25* | 1 | Confirm |
| 20 | 26 | 1 | Confirm |
| 22 | 26 | 1 | 52 |
| 25 | 31 | 1 | Confirm |
| 25 | 35 | 1 | 17 |
| 30 | 36 | 1 | Confirm |
| 32 | 38 | 1 | 24 |
| 38 | 44 | 1 | 20 |
*Reference-unit note: The 19 × 25 option omits an explicit dimensional unit in its option label. Confirm its units and connector fit before ordering rather than assuming a dimensional standard. Nominal trade labels are not substitutes for confirmed ID and OD.
The 7 × 11 and 7 × 12 options each have a 139 m whole-coil reference. For sizes marked “Confirm,” ask us about the required coil length. Confirm any wall-thickness or pressure requirement for the selected size.
Selection and Custom Manufacture
We manufacture this tubing to the agreed requirement. Send the actual ID, OD and length. For pump applications, confirm pump-head dimensions and operating duty with us before selection.
- Identify the fluid, operating temperature, pressure and duration of contact.
- Specify the selected inside and outside diameters, dimensional tolerance and total quantity.
- State the required cut length or continuous length and packaging arrangement.
- Provide any fitting, appliance or pump-head information needed to check compatibility.
- Request the material documentation and inspection evidence needed for the intended use.
Frequently Asked Questions
Is this product specifically for food-grade tubing?
Yes. This product uses food-grade silicone. Confirm the documentation applicable to your intended food or beverage contact conditions; no specific certification is asserted here.
Does −60 to +200°C mean every size is suitable for every duty?
No. This is the range, not a guarantee covering all fluids, pressures or exposure durations. Review the selected tubing and operating conditions before use.
Can I order more than one cut length?
Some size rows list more than one length option, such as 5 m and 20 m. Choose the required option and total quantity. Ask about other lengths if the table does not cover your requirement.
Is a high-pressure working limit supplied?
No numerical working-pressure rating is established. Provide your pressure and service conditions so the selected tubing’s suitability can be reviewed.
Request a Quotation
For wholesale food-grade silicone tubing, send IKSONIC your size and application requirements. Include the ID, OD, length, quantity and required material documentation.
Worldwide Delivery
Manufactured in China and shipped worldwide. For orders suitable for international express, delivery typically takes 3–7 days after dispatch, excluding production and order preparation. Transit times vary by destination and customs clearance. Confirm the shipping method and estimated transit time for your order.
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
Scan the QR code above, add me on WeChat.
